Engineered Architectural Fenestration & Entrance Systems
Precision-manufactured in our ISO 9001 and CE-certified industrial facilities. Every system is built to measure, tested for coastal wind-load endurance and high-altitude thermal containment across Colombian urban centers.
CE Certified Double Hung Fenestration: Technical Architecture for Colombia
A rigorous engineering analysis of constant-force balances, thermal break profiles, air permeability, and mechanical structural performance under Andean and tropical Caribbean climatic strains.
In high-density Colombian metropolitan centers such as Bogotá D.C., Medellín, and Cali, modern architectural fenestration must solve a compound engineering challenge: delivering high-volume air exchange without consuming exterior swing clearances, offering low acoustic infiltration near major vehicular corridors, and maintaining long-term dimensional stability despite heavy diurnal temperature swings. The CE Certified Aluminum Double Hung Window has emerged as the premier fenestration solution for institutional, commercial, and high-end multi-family developments throughout the Republic of Colombia.
Core Fenestration Engineering: Anatomical Blueprint
Unlike conventional single hung or low-cost sliding windows fabricated locally with non-thermal 5020 or 7038 aluminum profiles, our CE-certified double hung units are engineered around architectural-grade 6063-T6 or 6061-T6 aluminum alloys with a minimum nominal wall thickness of 1.8mm to 2.2mm. Both the upper and lower sashes slide vertically along independent, extruded structural tracks, balanced by industrial-grade counterbalance assemblies.
Constant Force Balance
Stainless steel coil spring balance systems calibrated to the exact weight of laminated double-glazed IGUs. Provides effortless fingertip operation with zero drift and long maintenance-free lifespans.
Polyamide PA66 GF25
Extruded 24mm to 34mm fiberglass-reinforced polyamide thermal breaks mechanically crimped between inner and outer aluminum extrusions, yielding U-values down to 1.6 W/m²·K.
Internal Tilt-In Sashes
Ergonomic flush tilt latches allow both upper and lower sashes to tilt inward at 90 degrees, enabling safe, ground-floor glass cleaning from inside high-rise residential towers in Bogotá or Medellín.
Sealing & Drainage Logic
Quadruple EPDM compression bulb weatherstripping with high-density finned woven brush seals. Stepped sill extrusion incorporates concealed backdraft check valves for water tightness at 450 Pa.
Structural Dynamics Under Colombia's NSR-10 Seismic Code
Colombia sits within the Pacific Ring of Fire and contains three active mountain ranges (Cordillera Occidental, Central, and Oriental), placing cities like Bogotá, Cali, Pasto, and Bucaramanga in zones of intermediate to high seismic hazard. Traditional brittle window assemblies frequently shatter or experience frame racking when primary concrete moment frames undergo lateral inter-story drift during seismic events.
Our CE certified double hung systems are engineered with perimeter installation clips and elastomeric perimeter joint tolerances that absorb seismic drift without transferring rotational or diagonal shear loads to the glass perimeter. Glazing pockets feature Santoprene structural setting blocks and continuous dry-glazing gaskets that cushion the insulated glass unit against seismic acceleration up to 0.35g, completely conforming to NSR-10 Title A and Title G architectural fenestration safety requirements.
Localized Engineering Scenarios Across Colombia's Microclimates
Colombia exhibits dramatic microclimates across distinct thermal floors (pisos térmicos). Discover how our double hung configurations are customized for specific Colombian departments.
Bogotá D.C. & Sabana
Subtropical highland climate where night temperatures drop to 4°C–8°C, alongside heavy urban acoustic pollution along TransMilenio transit arteries.
- Acoustic Target: Rw 38 dB – 42 dB with asymmetrical acoustic PVB lamination.
- Thermal Logic: Double glazed 6mm Low-E + 12A Argon + 6mm Clear (U-value ≤ 1.8 W/m²·K).
- Urban Benefit: Eliminates condensation during damp Andean mornings.
Medellín & Antioquia
The "City of Eternal Spring" requires optimized natural ventilation to minimize active air conditioning while managing frequent afternoon rainfall.
- Convection Airflow: Lower sash intakes cool ground air; upper sash exhausts warm ceiling air.
- Rain Deflection: Integrated overhead drip caps prevent ingress during tropical cloudbursts.
- Profile: Narrow sightline profiles matching modern El Poblado high-rises.
Cartagena & Barranquilla
High ambient heat, high relative humidity (above 85%), and corrosive airborne ocean chlorides from the Caribbean Sea.
- Surface Treatment: Qualicoat Class 2 powder coating or 25-micron anodic oxidation.
- Hardware: Marine-grade 316 stainless steel balance assemblies and tilt latches.
- Solar Control: Solarban 60 / tinted reflective glass to mitigate solar heat gain (SHGC ≤ 0.28).
Cali & Valle del Cauca
Warm afternoons with rapid cooling afternoon breezes (vientos del Pacífico) through the Farallones mountain passes.
- Ventilation Range: 50% net free clear opening area for rapid interior air flushes.
- Pest Defense: Integrated high-tensile 304 stainless steel insect screens.
- Structural Rating: Wind load resistance tested to EN 12210 Class C4 (1600 Pa design load).
Emerging Trends Shaping Fenestration Specification in Colombia
Driven by national green building initiatives, high-density vertical development, and institutional modernization, the Colombian facade sector is evolving rapidly.
Resolution 0549/2015 & CAMACOL Green Building
Colombia's Ministry of Housing mandated energy and water savings between 20% and 45% for new residential and commercial construction. CE certified double hung windows with certified U-values and SHGC ratings enable architects to secure EDGE (Excellence in Design for Greater Efficiencies) and LEED Gold certifications across Bogotá and Medellín developments.
Vertical Tower Densification & Maintenance Safety
With land scarcity in Colombian urban centers driving residential towers over 25 stories (Estratos 4, 5, and 6), exterior window cleaning poses severe insurance liabilities. The internal tilt-in functionality of European and American double hung designs eliminates the need for expensive exterior gondolas or hazardous scaffolding.
Shift from Non-Thermal to Thermal Break Extrusions
Historically, Colombia relied on uninsulated, hollow-chamber aluminum extrusions that caused condensation damage to drywall and interior woodwork in Andean zones. Leading developers (Amarilo, Marval, Constructora Bolívar) are progressively specifying insulated polyamide break extrusions to guarantee long-term interior asset preservation.
Acoustic Mitigation Along Mass-Transit Corridors
Urban acoustic ordinances in Bogotá, Medellín, and Bucaramanga require interior ambient sound below 45 dB. Incorporating asymmetrical double glazing (e.g., 6mm exterior + 12mm air + 4mm interior glass) in our double hung units dampens low-frequency traffic noise far more effectively than standard sliding sash assemblies.
Plan Your Direct B2B Import to Colombia with Our Factory Engineers
Receive comprehensive CAD shop drawings, BIM families, structural wind calculations under NSR-10, and CIF quotations to Puerto de Buenaventura, Cartagena, or Barranquilla.
Get CatalogEngineering Comparison: DERCHI CE Double Hung vs. Local Conventional Windows
A side-by-side technical evaluation highlighting why international certified fenestration delivers superior project lifecycle value for Colombian contractors.
| Performance Characteristic | Local Conventional Sliding (Sistemas 5020/744) | DERCHI CE Certified Aluminum Double Hung | Colombian Standard / Code Reference |
|---|---|---|---|
| Profile Alloy & Temper | Recycled or 6063-T5 (Wall 1.0mm - 1.2mm) | Primary Virgin 6063-T6 (Wall 1.8mm - 2.2mm) | NTC 2680 / ASTM B221 Architectural Standards |
| Thermal Transmittance (U-Value) | 5.4 – 5.8 W/m²·K (Severe heat loss/gain) | 1.6 – 2.1 W/m²·K (Polyamide PA66 Break) | Resolution 0549/2015 Energy Efficiency Rules |
| Acoustic Attenuation (Rw) | 22 dB – 26 dB (Felt pile leakage) | 38 dB – 42 dB (Quadruple EPDM bulb seals) | Norma Acústica Ambiental (MinAmbiente Colombia) |
| Seismic Inter-Story Drift Safety | Rigid screw-fastened frame (Cracking risk) | Elastomeric perimeter anchoring clips | NSR-10 Title A & Title G (Seismic Safety) |
| Water Tightness Under Pressure | 150 Pa (Frequent sill overflow in storms) | 450 Pa – 600 Pa (Baffled internal weeping) | EN 12208 (Class 9A) / ASTM E331 |
| Maintenance & Glass Cleaning | Requires exterior scaffolding/gondolas | 100% Inward sash tilt for internal access | Workplace Safety & Tower Maintenance Protocols |
Industrial Manufacturing Power: Guangdong Dejiyoupin Doors & Windows (DERCHI)
Ranked among China's Top 10 fenestration and entrance brands, our enterprise integrates R&D, precision automated extrusion, powder coating, structural assembly, and international logistics under one verified roof in Foshan.
25+
Years Industrial Experience
180,000m²
Modern Production Base
600+
Skilled Fenestration Specialists
100+
International Patents & Certs
Fully Certified Testing Lab
Our in-house automated test chambers subject complete window units to rigorous wind pressure, dynamic water infiltration, and structural fatigue cycles in full compliance with CE, ISO 9001, AS 2047, and UL fire standards.
Precision CNC Machining
Equipped with 4-axis and 5-axis German-engineered CNC milling centers that perform profile cutting, drainage milling, and balance routing with repeatable tolerances within ±0.1mm.
Dedicated Engineering Desk
Our bilingual structural engineers prepare custom CAD shop drawings, wind load calculations under Colombian NSR-10 parameters, and BIM models ready for Autodesk Revit integration on commercial bids.
Reinforced Maritime Export Crating
To withstand trans-Pacific shipping through the Panama Canal or to Buenaventura, every double hung window is protected with peelable surface film, corner shock buffers, and fumigated steel-strapped plywood crates.
Frequently Asked Questions: Sourcing Windows from China to Colombia
Clear, direct commercial answers covering tariffs, DIAN customs procedures, logistics routes, and technical compliance for Colombian developers and importers.
What is the import duty and tariff classification for aluminum windows in Colombia?
Which Colombian ports do you ship to, and what are the average transit times?
How does CE certification map to Colombian building regulations and NSR-10?
What are the structural advantages of double hung windows over sliding windows in Colombia?
Can you manufacture double hung windows according to custom architectural sizes?
How do you prevent glass breakage and profile scratches during ocean freight?
What surface finishes are recommended for projects in Cartagena or Barranquilla?
What are the standard B2B payment terms and minimum order quantities (MOQ)?
Accelerate Your Fenestration Specification for Colombia
Connect with our technical export engineers today to request standard profile sections, structural performance whitepapers, and tailored unit price matrices for your upcoming projects.
Get Catalog